Keep your electrical bed and medical fridge running, and your patients safe, with the UPS (Uninterrupted Power Supply) MediX-2 back up battery.
Key Features
- Pre-programmed ‘plug and play’ design. No need for an electrician or lengthy setup
- 98% efficient while on mains
- Fast battery recharge time
- Automatic voltage regulation with surge protection
- Rack/Tower
- Wall-mounting options
- Expandable battery options
- Custom solutions available
- Inbuilt AVR to optimise battery run
- Low audible noise at all times
- Local software included
- SNMP or Relay compatibility
Unparalleled Reliability
Our Medi-X units are designed with transformer-based
Line-Interactive technology to provide unmatched reliability.
This reduces the amount of unnecessary stress medical fridges and electric beds place on the UPS and maintains a 98% efficiency in normal operation. Our technical advantage and quality of product is evident with less than 0.5% of MediX units ever Returned.
Smart Monitoring With Ups Software
All Medi-X units come equipped with our advanced UPS smart software as
standard. USB Connected: Monitor, notify, and log critical parameters with ease.
Alerts: Receive SMS or email notifications for power failures and battery life updates. Stay informed and in control with Medi-X’s smart technology.
![]()
Specifications![]()
| Model |
MediX-2-3 |
MediX-2-12 |
| Capacity |
2000VA/1600W |
2000VA/1600W |
| Display |
LED and LCD |
LED and LCD |
| Frequency Range |
50Hz +/- 10% |
50Hz +/- 10% |
| Input Plug |
Aus Standard 10A |
Aus Standard 10A |
| Voltage Regulation |
230Vac +/- 10% |
230Vac +/- 10% |
| Frequency |
Batt. Mode 50Hz, +/- 1% |
Batt. Mode 50Hz, +/- 1% |
| Waveform |
Sine Wave |
Sine Wave |
| Transfer Time |
Typical 2-6ms |
Typical 2-6ms |
| Output Sockets |
2x AUS Standard 10A, 1x IEC 10A |
2x AUS Standard 10A, 1x IEC 10A |
| Efficiencies |
98% Efficient when on mains |
98% Efficient when on mains |
| Battery Type |
Sealed Lead Acid |
Sealed Lead Acid |
| Recharge Time |
6 - 8 Hours to 90% |
6 - 8 Hours to 90% |
| Communication |
USB - Options: SNMP or relay card |
USB - Options: SNMP or relay card |
| Software Supplied |
UPS Smart |
UPS Smart |
| DC Start / Cold Start |
YES |
YES |
| Surge Protection |
1600J |
4500A |
| Short Circuit |
Resettable Fuse |
Resettable Fuse |
| Display Indication & Audible Alarms |
IP & OP Volts, Battery Level, Load Level UPS, UPS Status |
IP & OP Volts, Battery Level, Load Level UPS, UPS Status |
| Audible Noise |
Less Than 25dB |
Less Than 25dB |
| Temperature |
0 - 40 Degrees |
0 - 40 Degrees |
| Humidity |
0-90% RH (Non-Condensing) |
0-90% RH (Non-Condensing) |
| Physical Dimensions (HxWxD) |
450x135x460 |
45x270x600 |
| Cables & Ventilation |
Cables: Allow 50mm rear on control unit and battery bank for cable access. Ventilation: Control unit only. 100mm front & 150mm rear ensuring adequate airflow. |
Cables: Allow 50mm rear on control unit and battery bank for cable access. Ventilation: Control unit only. 100mm front & 150mm rear ensuring adequate airflow. |
Warranty
24 months parts and labour
Downloads:
Data Sheet
